INHIBITORS
CALLYTIC MINI
Installing the CalLytic Mini, Electrolytic Scale Inhibitor on cold water lines protects pipework, boilers and hot water using appliances against the damaging effects of hard scale.
This electrolytic unit should be installed on cold water lines to prevent limescale from forming. The unit is suitable for use on 22mm pipework – it does not require earth bonding. Any scale that has formed around taps, sinks, showers, etc., will begin softening with regular contact with treated water. This soft scale is easier to remove than normal hard scale.
Surfaces frequently in contact with treated water are easier to clean – Shower heads are also descaled. After several months of descaling, hot water system efficiency will gradually increase.
Please note: Scale inhibitors are not suitable for eliminating hard scale in kettles. Please see Calmag water filtration for better water for drinking and cooking.
THE BENEFITS
✔ 5 years manufacturer guarantee
✔ No maintenance required
✔ No chemicals
✔ Whole house protection
✔ Durable nickel plating
SPECIFICATIONS (15mm)
Overall length: | 15mm |
Diameter | 25mm |
Material | Plated copper |
Fittings | 15mm compression (STD) |
Maximum working pressure | 12 bar (168 psi) |
Maximum temperature | 80 deg C |
Maximum flow rate: | 1.08 l/sec (14gpm) |
For all your Sales & Technical enquiries and for your nearest merchant
please call direct on 01535 210320
